On 09.09.10, In , by Matthew Panzarino
Comment posted GuruGuide: Jailbreak iPhone 2G 3G and 3GS on 3.1.2 Using Blackra1n RC3 by moks.
hi.. just got my new 3gs i phone.. i had it jailbbroken by my friend however i was not able to charge t and it went automatically off..now when i restarted it, the icon itunes and the connector appears on the screen.
my friend told me it has to be fixed with blackrain so he sent me the file but when i tried to run it, basically it did not work.. i mean a prompt message says “searching for device”
Now its been a week since i havent used my iphone because i dont know how to re start it,,
please help…
thank you
powered by SEO Super Comments
59 Responses
your pictures under #6 & 7 would not open- link broken?
Should be fixed now, thanks!
Guys, you are a marvel of the WWW
Thank you for contributing to the community. You rock!
Leo
Hey thanks, you’re welcome!
[WORDPRESS HASHCASH] The poster sent us ’0 which is not a hashcash value.
Blackra1n icon not showing up on springboard. What am I doing wrong?
If you’re running it on a windows machine, make sure you run Blackra1n from the C drive, not the desktop. Did you update your iPhone to version 3.1.2 first before attempting the Jailbreak?
Did somebody try this with an iphone 2g? If i upgrade to 3.1.2 with itunes it will lock my iphone for sure since I dont have an at&t sim card and it will only leave me with emergency calls enabled. If this happens is it possible to use blackra1n and then blacksnow to jailbreak and unlock after? Or is there any previous requierement? Thanks, waiting anxious for an answer since i want to upgrade it NOW!! hahah
Yes, you can do this with an iPhone 2G, the Blackra1n RC3 tool performs a hacktivation for you. You can then run the Blacksn0w tool to use your current provider for service!
Thanks Matthew, Ill try this and let everyone know the results
Great, thanks!
[WORDPRESS HASHCASH] The poster sent us ’0 which is not a hashcash value.
Before I do this, I entered to the blogspot (http://iphonejtag.blogspot.com/)website of Blackra1n and says the following:
“…If you are on a 2G iPhone, blacksn0w isn’t an option for you. But BootNeuter is, a completely free permanent unlock for your 2G. Of course, blackra1n will work great, and even hacktivate for you….”
Are you sure this will work for 2G? because it doesnt say that anywhere on the blog
It worked on an iphone 2G like a charm.
Thanks Matt
Hey, I’m glad to hear it! No problem at all.
[WORDPRESS HASHCASH] The poster sent us ’0 which is not a hashcash value.
have i done some thing worng with blackrain every time i turn phone off i have to run blackrain again gets a bit messy when at work on a building site end up with no phone till i get home please advise
Which iPhone model are you using? It sounds like it was not updated properly before it was Jailbroken. I would advise that you run a full restore on your phone back to factory stock 3.1.2. Then try the Blackra1n Jailbreak method again.
Everytime i reboot the phone it goes into recovery mode…i can get out of it by re running blackrain. Is this a known issue?? Had issues with wireless dieing as well…kinda working now after running blackrain twice.
I did jailbreak and unlocking.
I know its a small thing but be nice to not have to worry about jailbreaking everytime i want to reboot
You’re the second person to say that they’re encountering this so it seems to be going around, I’ll look into it and tell you what I find! Thanks!
Hmm, it seems that if you have an iPhone 3GS model that was made after week 42 of production, you may encounter this issue with Blackra1n RC3, are you running a 3GS model?
If so, it WILL get stuck in DFU recovery mode EACH AND EVERY TIME the device is rebooted. you WILL have to re-run blackrain to BOOT your device whenever you shut it down entirely, install software that requires a reboot, etc. this is because apple changed the bootloader and if your device is after week 41 this will happen. I’m sure they’re working on a fix.
To check your phone’s “week” read your serial number, digit 4 and 5 are your week.
So if you are week 41+ Iphone 3gs and/or Ipod Touch 3G wait for a fix for the bootloader or deal with having to connect and run blackra1n every time the phone reboots.
when i try to download blackra1n from http://blackra1n.com/ this website it says that it requires a username and password??
Or do i need to use a different software to jailbreak my ipod touch?
I just tried it, no password required. You should be able to use Blackra1n to Jailbreak your iPod touch.
My wifi not working?
Try one of the fixes mentioned here: http://www.theiphoneguru.net/2009/11/05/fix-for-common-iphone-problems-and-issues-after-blackra1n-jailbreak/
hay i have my phone uand running winterboard on it but now nometter what i do i cant get my visual voice mail to work at all if any one can help that would be great thanks
Have you tried going to Settings>General>Reset>Reset Network Settings yet?
I have an iphone 2g used blackra1n now using bootneuter to unlock but wont. Says its nothing to do on 4.6BL
Mine is 41week. Can anyone advise me whether it is able to jailbreak? Thanks.
Mine also requires a boot each time. week 44 with the blackrain hack. can someone update with a fix?
You should try the PwnageTool method of unlocking for an iPhone 2G. Give it a try in our Unlocking section up top!
Week 41 is borderline but should be able to be Jailbroken. There is a chance that it will be a tethered jailbreak however. Which would mean that you have to connect it to your computer every time you reboot.
No fix yet, I’ll be sure to post one when it becomes available!
Does the Iphone 3G also needs tethered jailbrake or just the Ipod Touch 3G and the 3GS??? also a dumb question…do I need to activate the Iphone through At&t first before unlocking and jailbraking?? or can I just unlock and jailbreak right out of the box?? thanks!!
Hi I have iphone 2g with 2.2 firmware and it is jailbroken and unlocked.
If I update via itunes and then use blackra1n to jailbreak and ultrasnow to unlock bb will that be ok? thanks
i was wondering if this can be done to a normal I pod touch 3.1.2 firmware version. also, i have read about tethered and untethered jailbreaks. I dont want to have to plug the device into a computer to turn it on or off either… will that happen if i do this?
and i have read that some people have problems with it getting stuck in a recovery mode?
just wanna get some of this cleared up before i try this..
Hi guys, just a quick question. I’ve got the iphone 3G (vers 3.1.2) week 13 and really want to jailbreak but just wanted to check that this will work for me as a UK user??
Many thanks!
Julian.
Yes! You can indeed jailbreak any production week of iPhone 3G. Follow the guide above and enjoy your jailbroken phone Julian!
Cody, what version of iPod touch are you trying to jailbreak? You can jailbreak 1g and 2g touches but the iPod touch 3g is still a “tethered” jailbreak, this means that you will have to attach it to your computer every time you reboot it. Cheers!
Yes, you’ll be fine Bob, that is the preferred method.
3g is an untethered Jailbreak. You don’t have to activate it first you can just jailbreak and unlock out of the box. A “hacktivation” is performed for you by Blackra1n.
I have iPhone 3G and when I unzip blackra1n and try to install to jailbreak my phone, it begins to recover with blackra1n page (face and flying phones) but then goes back to normal as it was before I hit “make it rain”. Any ideas? Using RC3 and following instructions exactly.
Thanks so much for the info, i have recently recived an ipod touch 3G and i know that geohot, only has a thered jailbreak for it. So ill guess ill have to wait. And also if you ould link me (or make urself
) how to put cracked apps onto ipod touch 3G. Thanks Matt! I Really appreciate it
I don’t support the whole app cracking scene, sorry! But thank you for your kind words!
I’ve got a jalibroken 3G running 3.1 2. I can’t find blackrain in Cydia. Do I need to run the app first on my mac? I assumed I would be able to find it in Cydia or Icy now?
great site…I’ll done as soon as I’m unlocked!
hey there Matthew Panzarino
i have a few question before jb 3.1.2…
i have iphone 3g simfree with 3.0 f/w JB : model MB496T and modem f/w:04.26.08
1. how do i backup all my contacs ? pics? movies and music ?
2. will it be safe and the JB will work fine? without wifi and youtube problems?
3. i read that this jb makes alot of problems … is the 3.1.2. so good for me to take the chance of messing up my iphone ?
4. if i have problems will i be able to restore to 3.1.2 without the JB ?
please write me back … and if you can chat with me directly to my mail … it would be easier…
thanks a lot
ok103
iPhone 3GS 3.1.2, jailbroken. I know there is no fix yet for having to run blackrain everytime you reboot it, but mine rebooted, I connected it to my PC to run blackrain, it looks like it’s working and I noticed it was taking longer than usual, then it flashes and reboot again asking for the usb. Is there a fix for this?
Not that I know of. I honestly don’t think that a tethered Jailbreak is a real Jailbreak. I would wait until there is an untethered option.
You definitely don’t need to install or run Blackra1n if you already have a jailbroken iPhone. If you’re looking for Blacksn0w, the unlocking app, it is available on Cydia. Blackra1n is an app run from your Mac if you don’t already have a Jailbroken phone.
1. You back up your contacts in the same way that you normally synchronize with your computer. Itunes has provisions for syncing your contacts and pictures with your computer on Mac or PC. Your movies and Music should already be on your computer as the iPhone synchronizes these with your PC or Mac every time you plug it in normally.
2. It should work. This is not a guarantee, but the 3G iPhones tend to work just fine without any major issues.
3. 3.1.2 didn’t really add a whole lot, so is it absolutely necessary? No.
4. You absolutely will be able to restore your iPhone back to 3.1.2 after the Jailbreak if you have issues.
Hope that helps!
Matthew,
I am running Version 3.1.3 on my 3GS iphone. Will I be able to jailbreak it using the instructions for version 3.1.2?
No unfortunately there is no Jailbreak currently for iPhone 3GS on 3.1.3. If you have your SHSH files on file with Cydia then you can downgrade to 3.1.2 then jailbreak it. If your iPhone hasn’t been jailbroken before then you definitely don’t.
I just purchased a new iphone 3gs I followed the instruction like for my other iphone
but when it gets to reboot part it doesn’t reboot. I have the blackra1n saved it in the c drive.
I have os 3.1.2. (7d11) something change ?
hi.. just got my new 3gs i phone.. i had it jailbbroken by my friend however i was not able to charge t and it went automatically off..now when i restarted it, the icon itunes and the connector appears on the screen.
my friend told me it has to be fixed with blackrain so he sent me the file but when i tried to run it, basically it did not work.. i mean a prompt message says “searching for device”
Now its been a week since i havent used my iphone because i dont know how to re start it,,
please help…
thank you
when i download the blackra1n.exe (RC3) file on my computer and launch it (while my iphone is connected,of course) a message comes up “blackra1n.exe has stopped working.windows will now close the program and notify you if there is a solution” it does that everytime no matter where i download the file to. could you help me? i’m trying to jailbreak and then unlock my iphone 3G S 3.1.2. should i try with another version of blackrain or should it be RC3? and why would it stop working everytime i launch it? thank you
Plug your iPhone into a computer with iTunes and restore it back to the standard firmware. Newer 3GS iPhones cannot be jailbroken yet.
I would try to run it on another computer. It sounds like you’re having issues running Blackra1n on that particular machine.
thank you for the answer….i just thought of sth else…do you think it could be because i’ve connected my iphone without a sim card in it?
No, it doesn’t sound like it. I don’t believe that Blackra1n cares whether there is a SIM in the phone or not…. If you have issues with Blackra1n, you can always try the PwnageTool method
blackra1n will NOT show up in my springboard, and i’ve tried it like five times!
what am i doing wrong?
Just use Jailbreakme. Check under the Jailbreaking and Unlocking section above.